IBM Books

AIS V3.4 Protocol Reference V2


Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (1853)
  • accounting and node statistics (1401)
  • activate
  • APPN monitoring command (1481)
  • activate_new_config
  • APPN configuration command (1472)
  • add
  • AppleTalk Phase 2 configuration command (1534)
  • APPN configuration command (1452)
  • IPv6 configuration command (1821)
  • IPv6 update packet filter configuration command (1839)
  • NDP configuration command (1895)
  • OSI configuration command (1754)
  • RIP6 configuration command (1986)
  • VINES configuration command (1573)
  • Address Resolution Protocol (ARP)
  • VINES (1568)
  • addresses
  • OSI/DECnet V monitoring command (1772)
  • aping
  • APPN monitoring command (1483)
  • AppleTalk Control Protocol
  • for PPP (1522)
  • AppleTalk Phase 2
  • basic configuration procedures (1518), (1525)
  • configuring (1517)
  • monitoring (1528)
  • network parameters (1520), (1526)
  • router parameters (1519)
  • AppleTalk Phase 2 configuration commands
  • add (1533)
  • delete (1535)
  • disable (1537)
  • enable (1539)
  • list (1541)
  • set (1543)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1545)
  • cache (1547)
  • clear counters (1549)
  • counters (1550)
  • dump (1552)
  • interface (1554)
  • APPN (1427)
  • monitoring (1475)
  • APPN (DLSw) (1381)
  • APPN configuration commands
  • activate_new_config (1471)
  • add (1451)
  • delete (1467)
  • enable/disable (1444)
  • list (1469)
  • set (1447)
  • TN3270 (1443)
  • APPN dynamic reconfiguration (1516)
  • APPN Frame Relay BAN Connection Network (1407), (1460), (1461)
  • APPN monitoring commands
  • accessing (1477)
  • activate (1480)
  • aping (1482)
  • deactivate link (1484)
  • dump (1486)
  • list (1488)
  • log (1490)
  • memory (1492)
  • restart (1500)
  • rtp status (1494)
  • rtp switchpath (1496)
  • rtp test (1498)
  • stop (1502)
  • summary (1479)
  • tn3270e (1504), (1508)
  • transmit (1506)
  • atecho
  • AppleTalk Phase 2 monitoring command (1546)
  • B
  • before you configure (1393)
  • BGP monitoring commands
  • destinations
  • received (2064)
  • BGP6 configuration commands (2017), (2023), (2028), (2036), (2044)
  • add
  • aggregate (2018)
  • neighbor (2019)
  • no-receive (2020)
  • receive (2021)
  • send (2022)
  • change
  • change originate (2024)
  • change receive (2026)
  • change send (2027)
  • delete
  • aggregate (2029)
  • neighbor (2030)
  • no (2031)
  • originate (2032)
  • receive (2034)
  • send (2035)
  • disable
  • BGP6 speaker (2037)
  • classless-bgp (2038)
  • neighbor (2039)
  • enable (2040)
  • BGP6 speaker (2041)
  • compare-med-from-diff-AS (2042)
  • neighbor (2043)
  • list
  • aggregate (2045)
  • all (2046)
  • BGP6 speaker (2047)
  • neighbor (2048)
  • no (2049)
  • originate (2050)
  • receive (2052)
  • send (2053)
  • move (2054)
  • policy-to-neighbor (2025), (2033), (2051)
  • set (2055)
  • update (2056)
  • BGP6 dynamic reconfiguration (2077)
  • BGP6 monitoring commands
  • disable neighbor (2058)
  • dump routing tables (2059)
  • enable neighbor (2062)
  • list (2063)
  • neighbors (2065)
  • parameter (2066)
  • paths (2067)
  • ping6 (2068)
  • policy-list (2070)
  • reset neighbor (2072)
  • sizes (2073)
  • traceroute6 (2074)
  • Border Gateway Protocol for IPv6--see BGP6 (2078)
  • Border Node
  • COS mapping table (1466)
  • routing list (1465)
  • Branch Extender (1359), (1362), (1382), (1453), (1454) , (1455), (1456), (1457), (1458), (1459) , (1463), (1464)
  • C
  • cache
  • AppleTalk Phase 2 monitoring command (1548)
  • IPv6 monitoring command (1855)
  • change
  • IPv6 configuration command (1823)
  • IPv6 update packet filter configuration command (1841)
  • NDP configuration command (1897)
  • RIP6 configuration command (1988)
  • change metric
  • OSI/DECnet V monitoring command (1774)
  • change prefix-address (1757)
  • clear (1759)
  • PIM monitoring command (1944)
  • CLNP protocol (1685)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1776)
  • command summary
  • BGP (2016), (2057)
  • DNA IV (1632)
  • configurable Held Alert Queue (1373), (1392), (1450)
  • configuration changes, affect on the router (1377)
  • configuration options (1378)
  • configuration requirements (1379)
  • configuring TN3270 under APPN (1428)
  • connection networks (1358)
  • COS (1396)
  • CoS mapping table (1386)
  • counters
  • AppleTalk Phase 2 monitoring command (1551)
  • IPv6 monitoring command (1857)
  • VINES monitoring command (1589)
  • D
  • DDDLU (1429)
  • Creating LUs at VTAM (1430)
  • Deleting LUs from VTAM (1431)
  • example VTAM PU definition (1433)
  • using Network Dispatcher with (1432)
  • deactivate link
  • APPN monitoring command (1485)
  • deactivate LU
  • TN3270E monitoring command (1512)
  • DECnet NCP
  • See NCP (1598)
  • delete
  • AppleTalk Phase 2 configuration command (1536)
  • APPN configuration command (1468)
  • IPv6 configuration command (1825)
  • IPv6 update packet filter configuration command (1843)
  • NDP configuration command (1899)
  • OSI configuration command (1761)
  • PIM configuration command (1928)
  • RIP6 configuration command (1990)
  • VINES configuration command (1574)
  • dhcpv6-relay
  • NDP monitoring command (1913)
  • Dial on Demand (1415)
  • APPN using (1414)
  • Digital Network Architecture (DNA) phase IV (1597)
  • disable
  • AppleTalk Phase 2 configuration command (1538)
  • APPN configuration command (1446)
  • IPv6 configuration command (1827)
  • NDP configuration command (1901)
  • OSI configuration command (1763)
  • PIM configuration command (1930)
  • RIP6 configuration command (1992)
  • VINES configuration command (1575)
  • DLUR (1355), (1356), (1389), (1390), (1403)
  • DLUR retry algorithm (1404)
  • DNA IV
  • access control
  • configuring (1620)
  • exclusive (1622)
  • inclusive (1621)
  • managing traffic (1619)
  • addressing
  • 802.5 Token (1608)
  • description (1606)
  • Ethernet data link (1607)
  • area routers
  • description (1613)
  • level 1 (1614)
  • level 2 (1615)
  • area routing filters (1623)
  • area support of (1600)
  • blending domains (1624)
  • configuration
  • for X.25 (1627)
  • designated router for (1611)
  • LAT protocol (1603)
  • MOP support of (1601)
  • Network Control Program (NCP) (1617)
  • See NCP (1599)
  • routing (1609), (1610)
  • routing parameters (1616)
  • routing tables (1612)
  • special considerations and limitations (1604)
  • terminology and concepts (1605)
  • DNA IV configuration commands
  • define
  • circuit (1635)
  • executor (1637)
  • module access (1639)
  • module routing (1641)
  • node (1643)
  • help (1633)
  • purge
  • module access (1647)
  • module routing (1649)
  • show
  • area (1655)
  • node (1657)
  • show/list
  • circuit (1661)
  • executor (1663)
  • module access (1665)
  • module routing (1667)
  • zero
  • circuit (1673)
  • executor (1675)
  • module access (1671), (1677)
  • DNA IV monitoring commands
  • define
  • circuit (1636)
  • executor (1638)
  • module access (1640)
  • module routing (1642)
  • node (1644)
  • help (1634)
  • purge
  • module access (1648)
  • module routing (1650)
  • show
  • area (1656)
  • node (1658)
  • show/list
  • circuit (1662)
  • executor (1664)
  • module access (1666)
  • routing (1668)
  • zero
  • circuit (1674)
  • executor (1676)
  • module access (1678)
  • module_access (1672)
  • DNA V
  • networks (1625)
  • X.25 configuration
  • Count 2 (1626)
  • DNAV-info
  • OSI/DECnet V monitoring command (1780)
  • dump
  • AppleTalk Phase 2 monitoring command (1553)
  • APPN monitoring command (1487)
  • IPv6 monitoring command (1859)
  • NDP monitoring command (1915)
  • PIM monitoring command (1942)
  • RIP6 monitoring command (2004)
  • VINES (1591)
  • dump routing tables
  • BGP6 monitoring command (2060)
  • dynamic reconfiguration
  • APPN (1515)
  • BGP6 (2076)
  • IPv6 (1888)
  • MFC (1976)
  • MFC for IPv6 (1979)
  • NDP6 (1920)
  • PIM (1971)
  • PIM for IPv6 (1974)
  • RIP6 (2013)
  • E
  • enable
  • AppleTalk Phase 2 configuration command (1540)
  • APPN configuration command (1445)
  • IPv6 configuration command (1829)
  • NDP configuration command (1903)
  • OSI configuration command (1765)
  • PIM configuration command (1932)
  • RIP6 configuration command (1994)
  • VINES configuration command (1578)
  • Enterprise Extender Support for HPR over IP (1375)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1782)
  • ES-IS protocol (1683)
  • description (1746)
  • hello message (1747)
  • es-is-stats
  • OSI/DECnet V monitoring command (1784)
  • exit (1531)
  • console command (1532)
  • VINES monitoring command (1595)
  • Extended Border Node (1360), (1363)
  • configuring (1383)
  • CoS mapping table (1387)
  • network requirements (1361)
  • routing list (1385)
  • F
  • features
  • IP version 6 (IPv6) (1813)
  • focal point (1367), (1391)
  • G
  • getting help (1529)
  • H
  • help
  • console command (1530)
  • HIDLU (1434)
  • HPR (1354), (1388)
  • I
  • implementation on the router (1352)
  • implicit focal point (1374), (1462)
  • interface
  • AppleTalk Phase 2 monitoring command (1555)
  • IPv6 monitoring command (1861)
  • PIM monitoring command (1946)
  • intermediate session data, collecting (1402)
  • internal
  • IPv6 monitoring command (1863)
  • IP
  • packet size (2081)
  • IPv6
  • configuring (1816)
  • overview (1815)
  • using (1814)
  • ipv6 command (1818)
  • IPv6 configuration commands
  • add (1820)
  • change (1822)
  • delete (1824)
  • disable (1826)
  • enable (1828)
  • list (1830)
  • move (1832)
  • set (1834)
  • summary (1819)
  • update (1836)
  • IPv6 dynamic reconfiguration (1889)
  • IPv6 monitoring commands
  • access-control (1852)
  • accessing (1848)
  • cache (1854)
  • counters (1856)
  • dump (1858)
  • interface (1860)
  • internal (1862)
  • mcast (1864)
  • mld (1866)
  • packet-filter (1878)
  • path-mtu (1880)
  • ping6 (1882)
  • reset (1868)
  • route (1870)
  • sizes (1872)
  • sniffer (1874)
  • static (1876)
  • summary of (1850)
  • traceroute6 (1884)
  • tunnels (1886)
  • IPv6 update packet filter configuration commands
  • add (1838)
  • change (1840)
  • delete (1842)
  • list (1846)
  • move (1844)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1786)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1706)
  • point-to-point (1712)
  • IS-IS protocol
  • description (1700)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1709)
  • L2 (1711)
  • IS-IS areas (1701)
  • IS-IS domain (1704)
  • overview (1684)
  • is-is-stats
  • OSI/DECnet V monitoring command (1788)
  • ISDN Permanent Circuit
  • APPN using (1412)
  • ISDN permanent connection (1413)
  • J
  • join
  • PIM monitoring command (1948)
  • L
  • l1-routes
  • OSI/DECnet V monitoring command (1790)
  • l1-Summary
  • OSI/DECnet V monitoring command (1794)
  • l1-Update
  • OSI/DECnet V monitoring command (1798)
  • l2-Routes
  • OSI/DECnet V monitoring command (1792)
  • l2-Summary
  • OSI/DECnet V monitoring command (1796)
  • l2-Update
  • OSI/DECnet V monitoring command (1800)
  • leave
  • PIM monitoring command (1950)
  • link level parameter lists (1409)
  • list
  • AppleTalk Phase 2 configuration command (1542)
  • APPN configuration command (1470)
  • APPN monitoring command (1489)
  • IPv6 configuration command (1831)
  • IPv6 update packet filter configuration command (1847)
  • NDP configuration command (1905)
  • NDP monitoring command (1917)
  • OSI configuration command (1767)
  • PIM configuration command (1934)
  • RIP6 configuration command (1996)
  • RIP6 monitoring command (2006)
  • TN3270E monitoring command (1514)
  • VINES configuration command (1581)
  • Local Area Terminal (LAT) protocol (1602)
  • log
  • APPN monitoring command (1491)
  • LU parameter list (1410)
  • M
  • managing network nodes (1365)
  • managing the router network node (1364)
  • mcache
  • PIM monitoring command (1952)
  • mcast
  • IPv6 monitoring command (1865)
  • memory
  • APPN monitoring command (1493)
  • message units, supported, APPN-related alerts
  • MFC dynamic reconfiguration (1977)
  • MFC for IPv6 dynamic reconfiguration (1980)
  • mgroups
  • PIM monitoring command (1954)
  • mld
  • IPv6 monitoring command (1867)
  • monitoring
  • APPN (1476)
  • IPv6 monitoring commands (1851)
  • NDP monitoring commands (1911)
  • PIM monitoring commands (1940)
  • RIP6 monitoring commands (2002)
  • move
  • IPv6 configuration command (1833)
  • IPv6 update packet filter configuration command (1845)
  • mstats
  • PIM monitoring command (1956)
  • Multicast Forwarding Cache- -see MFC (1978)
  • N
  • NCP
  • description of (1618)
  • NCP configuration commands
  • purge (1646)
  • set (1652)
  • show (1654)
  • show circuit (1660)
  • summary of (1628)
  • zero (1670)
  • NCP monitoring commands
  • purge (1645)
  • set (1651)
  • show (1653)
  • show circuit (1659)
  • summary of (1629)
  • zero (1669)
  • NDP
  • configuring (1890)
  • NDP command (1892)
  • NDP configuration commands
  • add (1894)
  • change (1896)
  • delete (1898)
  • disable (1900)
  • enable (1902)
  • list (1904)
  • set (1906)
  • summary (1893)
  • NDP monitoring commands
  • accessing (1908)
  • dhcpv6-relay (1912)
  • dump (1914)
  • list (1916)
  • ping6 (1918)
  • summary of (1910)
  • NDP6 dynamic reconfiguration (1921)
  • neighbor
  • PIM monitoring command (1958)
  • neighbor discovery protocol for IPv6--see NDP6 (1922)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1524)
  • node level parameter lists (1411)
  • node tuning (1397)
  • node types (1351)
  • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1735), (1736), (1738), (1740), (1742)
  • attached L2 IS routers (1727)
  • authentication passwords (1744)
  • designated IS (1715)
  • domain specific part (DSP) (1691)
  • end system (ES) (1679)
  • end system hello messages (1748)
  • ES-IS protocol (1745)
  • external routing (1734)
  • initial domain part (IDP) (1689)
  • description (1690), (1692)
  • intermediate system (IS) (1681)
  • internal routing (1733)
  • IS hello messages (1749)
  • IS to IS hello (IIH) messages (1707), (1713)
  • IS-IS addressing format (1693)
  • address format (1698)
  • AFI (1739)
  • area address (1695)
  • default address prefixes (1743)
  • fixed length IDI (1737)
  • non-pseudonode (1720), (1724)
  • point-to-point (1714)
  • pseudonode (1722), (1726)
  • selector (1697)
  • system ID (1696)
  • variable length IDI (1741)
  • IS-IS areas (1702)
  • IS-IS domain (1703)
  • L1 IIH message (1708)
  • L1 link state updates (1719), (1721)
  • L1 routing (1730)
  • L2 IIH messages (1710)
  • L2 link state updates (1723), (1725)
  • L2 routing (1731)
  • link state databases (1717)
  • link state updates (1718)
  • multicast addresses (1699)
  • network address structure (1688)
  • network addresses (1687)
  • Network Entity Title (NET) (1694)
  • network protocol data units (NPDU) (1680)
  • NSAP addressing (1686)
  • protocols running under (1682)
  • pseudonode (1716)
  • routing metric (1732)
  • routing tables (1729)
  • synonymous areas (1705)
  • unattached L2 IS routers (1728)
  • optional features (1353)
  • OSI
  • configuring (1750)
  • X.25 over OSI (1755)
  • OSI configuration commands
  • add (1753)
  • change prefix address (1756)
  • clear (1758)
  • delete (1760)
  • disable (1762)
  • enable (1764)
  • list (1766)
  • set (1768)
  • summary of (1752)
  • OSI/DECnet V
  • monitoring (1751)
  • OSI/DECnet V monitoring commands
  • addresses (1771)
  • change metric (1773)
  • clnp-stats (1775)
  • designated-router (1777)
  • DNAV-info (1779)
  • es-adjacencies (1781)
  • es-is-stats (1783)
  • is-adjacencies (1785)
  • is-is-stats (1787)
  • l1-routes (1789)
  • l1-summary (1793)
  • l1-update (1797)
  • l2-routes (1791)
  • l2-summary (1795)
  • l2-update (1799)
  • OSI/DECnet V monitoring command (1778)
  • ping-1139 (1801)
  • route (1803)
  • send (echo packet) (1805)
  • subnets (1807)
  • summary of (1770)
  • toggle (alias/no alias) (1809)
  • traceroute (1811)
  • P
  • packet size (2079)
  • packet-filter
  • IPv6 monitoring command (1879)
  • path-mtu
  • IPv6 monitoring command (1881)
  • PIM
  • pim
  • configuring (1923)
  • PIM monitoring command (1960)
  • PIM command (1925)
  • PIM configuration commands
  • delete (1927)
  • disable (1929)
  • enable (1931)
  • list (1933)
  • set (1935)
  • summary (1926)
  • PIM dynamic reconfiguration (1972)
  • PIM for IPv6 dynamic reconfiguration (1975)
  • PIM monitoring commands
  • accessing (1937)
  • clear (1943)
  • dump (1941)
  • interface (1945)
  • join (1947)
  • leave (1949)
  • mcache (1951)
  • mgroups (1953)
  • mstats (1955)
  • neighbor (1957)
  • pim (1959)
  • ping (1963)
  • reset (1965)
  • summary of (1939)
  • summary pim (1961)
  • traceroute (1967)
  • variables (1969)
  • ping
  • PIM monitoring command (1964)
  • ping-1139
  • OSI/DECnet V monitoring command (1802)
  • ping6
  • BGP6 monitoring command (2069)
  • IPv6 monitoring command (1883)
  • NDP monitoring command (1919)
  • RIP6 monitoring command (2008)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1523)
  • policy-list
  • BGP6 monitoring command (2071)
  • port level parameter lists (1408)
  • port types supported (1376)
  • Protocol Independent Multicast Routing Protocol--see PIM (1973)
  • protocols
  • Digital Network Architecture (DNA) Phase IV (1596)
  • R
  • reset
  • IPv6 monitoring command (1869)
  • PIM monitoring command (1966)
  • RIP6 monitoring command (2010)
  • restart
  • APPN monitoring command (1501)
  • restrictions (1405)
  • RIP6
  • configuring (1981)
  • RIP6 command (1983)
  • RIP6 configuration commands
  • add (1985)
  • change (1987)
  • delete (1989)
  • disable (1991)
  • enable (1993)
  • list (1995)
  • set (1997)
  • summary (1984)
  • RIP6 dynamic reconfiguration (2014)
  • RIP6 monitoring commands
  • accessing (1999)
  • dump (2003)
  • list (2005)
  • ping6 (2007)
  • reset (2009)
  • summary of (2001)
  • traceroute6 (2011)
  • route
  • IPv6 monitoring command (1871)
  • OSI/DECnet V monitoring command (1804)
  • routing information protocol for IPv6--see RIP6 (2015)
  • routing list (1384)
  • routing tables
  • BGP6 dump command (2061)
  • rtp status
  • APPN monitoring command (1495)
  • rtp switchpath
  • APPN monitoring command (1497)
  • rtp test
  • APPN monitoring command (1499)
  • RU size (1398), (1449)
  • S
  • SDLC (1421)
  • APPN using (1420)
  • Seed router
  • AppleTalk Phase 2 (1521), (1527)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1806)
  • set
  • AppleTalk Phase 2 configuration command (1544)
  • APPN configuration command (1448)
  • IPv6 configuration command (1835)
  • NDP configuration command (1907)
  • OSI configuration command (1769)
  • PIM configuration command (1936)
  • RIP6 configuration command (1998)
  • VINES configuration command (1583)
  • sizes
  • IPv6 monitoring command (1873)
  • sniffer
  • IPv6 monitoring command (1875)
  • SNMP managed node, using the router as (1371)
  • sphere of control (1368)
  • static
  • IPv6 monitoring command (1877)
  • stop
  • APPN monitoring command (1503)
  • subnets
  • OSI/DECnet V monitoring command (1808)
  • summary of
  • NCP configuration commands (1630)
  • NCP monitoring commands (1631)
  • summary pim
  • PIM monitoring command (1962)
  • supported message units (1369)
  • supported message units, APPN-related alerts (1370)
  • T
  • talk
  • OPCON command (1478), (1817), (1849), (1891), (1909) , (1924), (1938), (1982), (2000)
  • TG characteristics (1395)
  • the router as entry point (1366)
  • TN3270 (1422)
  • tn3270E server configuration (1425)
  • what is (1423)
  • tn3270e
  • APPN monitoring command (1505), (1509)
  • TN3270E monitoring commands
  • deactivate LU (1511)
  • list (1513)
  • TN3270E Server (1380)
  • TN3270E server (1424)
  • client IP Address to LU/Pool Mapping (1436)
  • client to LU mapping (1435)
  • configuration commands (1473)
  • Configuration parameters (1474)
  • Configuring, using DLUR (1441)
  • Configuring, using local node identifier (1442)
  • example configurations (1440)
  • load balancing among multiple PUs (1439)
  • monitoring commands (1510)
  • port and IP address mapping (1438)
  • Server TCP port to pool mapping (1437)
  • tn3270E server configuration (1426)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1810)
  • Token-Ring 4/16
  • packet size (2080)
  • topology Database Garbage Collection (1372)
  • traceroute
  • OSI/DECnet V monitoring command (1812)
  • PIM monitoring command (1968)
  • traceroute6
  • BGP6 monitoring command (2075)
  • IPv6 monitoring command (1885)
  • RIP6 monitoring command (2012)
  • traces (1399)
  • tracing (1400)
  • transmission group characteristics, setting (1394)
  • transmit
  • APPN monitoring command (1507)
  • transporting data (1406)
  • tunnels
  • IPv6 monitoring command (1887)
  • U
  • update
  • IPv6 configuration command (1837)
  • using the router as SNMP managed node
  • V
  • V.25 bis (1419)
  • APPN using (1418)
  • variables
  • PIM monitoring command (1970)
  • VINES (1582)
  • Address Resolution Protocol (ARP) (1569)
  • basic configuration procedures (1570)
  • client nodes (1559)
  • configuring (1556)
  • disabling an interface (1576)
  • disabling globally (1577)
  • enabling an interface (1579)
  • enabling globally (1580)
  • monitoring (1571)
  • monitoring commands (1587)
  • neighbor tables (1564)
  • dumping (1592)
  • setting size (1586)
  • network layer protocols (1560)
  • Address Resolution Protocol (ARP) (1567)
  • Internet Control Protocol (ICP) (1566)
  • Routing Update Protocol (RTP) (1562)
  • VINES IP (1561)
  • overview (1557)
  • routing tables (1563)
  • dumping (1593)
  • setting size (1585)
  • RTP implementation (1565)
  • service nodes (1558)
  • setting number of client nodes (1584)
  • VINES configuration commands (1572)
  • VINES monitoring commands
  • counters (1588)
  • dump (1590)
  • exit (1594)
  • VTAM DSPU (1357)
  • W
  • WAN reroute (1416)
  • WAN restoral (1417)

  • [ Top of Page | Previous Page | Table of Contents | Index ]